Automatic Document Feeder At A Glance - Xerox 1200 User Manual

5
6
7

Automatic Document Feeder at a glance

116
Chapter 9
Remove the plastic cap from the port on the back of the scanner and put it in a
safe place.
Remove the
plastic cap.
Plug the cable from the document feeder into the small port on the back of the scanner.
Switch on the scanner and then switch on your Macintosh.
The scanner makes some sounds as it warms up. After about 20 seconds, the
document feeder and scanner are ready to use.
Document guide
Document
feeder cover
Document
feeder
connector
Attachment brackets
cable
Insert the
connector
cable.
Document tray
Paper-height limit mark
Paper-size mark
Document exit tray