Handling Film - Xerox 1200 User Manual

7 Remove the plastic cap from the port on the back of the scanner and put it in a
safe place.
Remove the
plastic cap.
8 Plug the cable from the adapter firmly into the small port on the back of the scanner.
9 Switch on the scanner and then switch on your Macintosh.
The scanner may make some sounds as it calibrates and warms up. After
about 20 seconds, the adapter and scanner are ready to use.

Handling film

To protect your valuable film from fingerprints, grease, and so on, wear
gloves. Most photography supply stores sell gloves designed for handling film.
Insert the
connector
cable.
Using the Transparent Media Adapter
141