Xerox 1200 User Manual page 37

Aligning a single original
To ensure that the alignment of the scanned image matches the alignment of
the original, you can use the alignment mark.
To align an original page on the document glass:
1 Lift the scanner cover, as shown.
2 Place the original face down on the document glass.
Position the original so the top edge is toward the rear of the document glass
and the top-right corner points to the alignment mark, as shown.
Original face down
3 See "Opening the OneScanner Dispatcher Application," later in this chapter, for
complete scanning instructions.
Alignment mark
Scanning Images
29