Xerox 1200 User Manual page 171

Scanner is the only device connected to the Macintosh
The scanner is connected directly to the Macintosh.
No other external SCSI devices are set up.
All Macintosh computers except Macintosh IIfx and PowerBook
Macintosh
Scanner
Macintosh IIfx only
Macintosh IIfx
Scanner
Scanner connects directly to Macintosh
with SCSI system cable and terminator.
IIfx terminator
Macintosh PowerBook only
Macintosh
PowerBook
Scanner
Scanner connects directly to
Macintosh with SCSI system cable.
Scanner connects directly to Macintosh
with SCSI system cable and terminator.
Terminator
Scanner Termination
m No external SCSI terminator is needed.
m Use factory setting (SCSI ID number 2,
termination on); no change is required.
m You can change the scanner ID number if
you need to, but set termination on.
Scanner Termination
m Use special Apple Macintosh IIfx terminator
between large end of system cable and
scanner.
m Set scanner SCSI ID to number 2,
termination off.
m You can change the scanner ID number if
you need to, but set termination off.
Scanner Termination
m Use external terminator between large end of
system cable and scanner.
m Set scanner SCSI ID to number 2,
termination on.
m You can change the scanner ID number if
you need to, but set termination on.
Assembling a SCSI Chain
163