Cleaning; Storage - Silvercrest SHM 300 C1 Operating Instructions Manual

2) Push the whisks
into the slots until they click audibly into
place and sit firmly.
3) Insert the mains plug
socket.
4) To start operating the appliance, move the
speed switch
You can select between 5 speed settings and
also use the Turbo button
"Speed levels").
5) Press the tool-release button
whisks or the kneading hooks
NOTE
► For safety reasons, the whisks
hooks can only be released if the speed
switch is set to the position "0".
│ GB │ IE
■ 18
or the kneading hooks
Always insert the kneading
hook or the whisk
without the ring into the
intended slot on the appli-
ance (labelled with an icon).
Always insert the kneading
hook or the whisk
with the ring on the shaft
into the intended slot on the
appliance (labelled with an
icon).
into a mains power
to the desired speed setting.
(see section
to release the
.
and kneading

Cleaning

DANGER!
RISK OF ELECTRICAL SHOCK!
► Always remove the plug
socket before cleaning the appliance! There
is a risk of electric shock!
Never submerge the hand element
water or other liquids!
■ Clean the hand element
only with a damp cloth and, if necessary, with
a mild detergent.
■ The whisks and the kneading hooks
be cleaned under running water or in warm
water with detergent. Dry all parts thoroughly
after cleaning.
We recommend cleaning the attachments
directly after use. This removes food residue and
reduces the risk of bacterial contamination.
NOTE
The whisks
can also be cleaned in the dish-
washer.

Storage

■ Store the cleaned appliance in a clean, dust-free
and dry location.
from the power
in
containing the motor
and the kneading hooks
SHM 300 C1
can