Typical Power Consumption - ETC ColorSource Spot Installation Manual

ETC Installation Guide
ColorSource Spot v1.7
Note:
must be replaced only by a qualified technician. Contact ETC
Customer Support for assistance.
Environment
The ColorSource Spot operates in ambient temperatures of 0°C–40°C and
comes with a variable-speed fan. The ColorSourceSpot is for indoor use only.
Maximum recommended ambient operating temperature: Ta = 40°C
•
(104°F)
Maximum anticipated external surface temperature at 40°C ambient:
•
Tmax = 80°C (176°F)
External temperatures after 5 minutes of full-brightness operation at
•
25°C (77°F) ambient: 30°C (86°F)
External Temperature (steady state achieved) at 25°C (77°F): 36°C
•
(97°F)
Electrical
Operates between 100 V and 240 VAC at a frequency of 50/60 Hz.
•
Maximum power consumption is 185 W.
•
Up to 9 luminaires (15 A max) may be linked via power thru connector
•
(10 luminaires total per circuit) when used with an R20 Relay Module
or Unison Echo Relay Panel. Consult breaker trip curves when used
with other equipment. Requires power from a non-dimmable source.
Inrush:
•
120 V: 28 A (first half-cycle)
-
240 V: 46 A (first half-cycle)
-

Typical Power Consumption

Idle
Direct at Full
ColorSource Spot
The light source in this luminaire is not user-replaceable, and
100 V
Power Current
1.19 W 0.05 A
168 W 1.69 A
120 V
Power Current
2.07 W 0.05 A
166 W 1.39 A
Page 3 of 12
230 V
Power Current
1.5 W 0.05 A
166 W 0.72 A
ETC