Network Setup(Phaser 3125/N Only); Introduction; Supported Operating Systems - Xerox Phaser 3124 User Manual

4
Network setup(Phaser 3125/N
only)
This chapter gives you basic information for setting up your printer for
network connections.
This chapter includes:
•

Introduction

•

Supported operating systems

Once you have connected your printer to a network with an RJ-45
Ethernet cable, you can share the printer with other network users.
You need to set up the network protocols on the printer to use it as your
network printer.
Supported operating systems
The following table shows the network environments supported by the
printer:
Item
Network interface
Network operating
system
Network protocols
Dynamic
addressing server
• TCP/IP: Transmission Control Protocol/Internet Protocol
• DHCP: Dynamic Host Configuration Protocol
• BOOTP: Bootstrap Protocol
4.1
<Network setup(Phaser 3125/N only)>
Introduction
Requirements
• 10/100 Base-TX
• Windows 98/Me/NT 4.0/2000/XP(32/64 bit)/
2003
• Linux OS including Red Hat 8 ~ 9,
Fedora Core 1 ~ 3, Mandrake 9.2 ~ 10.1,
SuSE 8.2 ~ 9.2
• Mac OS 8.6 ~ 9.2, 10.1 ~ 10.4
• Unix HP-UX, Solaris, SunOS, SCO UNIX
• TCP/IP
• EtherTalk
• HTTP 1.1
• SNMPv2
• DHCP, BOOTP