Xerox Phaser 2135 User Manual page 9

User safety summary
Your printer and the recommended consumable supplies have been designed and tested
to meet strict safety requirements. Attention to the following notes will ensure the
continued safe operation of your printer.
Electrical Safety
Use the power cord supplied with your printer.
I
Do not use a ground adapter plug to connect the printer to a power source
I
receptacle that lacks a ground connection terminal.
Plug the power cord directly into a properly grounded electrical outlet. Do not use
I
an extension cord. If you do not know whether an outlet is grounded, ask an
electrician to check the outlet.
Warning
Avoid the potential of severe electrical shock by ensuring the printer is
properly grounded.
Do not place the printer where people may step on the power cord.
I
Do not place objects on the power cord.
I
Do not obstruct the ventilation openings. These openings are provided to prevent
I
overheating of the printer.
Warning
Do not push objects into slots and openings on the printer. Making a contact
with a voltage point or shorting out a part could result in fire or electrical
shock.
If you notice unusual noises or odors, switch off the printer power immediately.
I
Disconnect the power cord from the electrical outlet. Call an authorized service
representative to correct the problem.
The power cord is attached to the printer as a plug-in device at the back of the
I
printer. In the event it is necessary to remove all electrical power from the printer,
disconnect the power cord from the power receptacle.