Xerox Phaser 2135 User Manual page 38

Transparency Specifics
250-sheet capacity for Standard or 200-sheet capacity Premium
I
transparencies
Transparencies can be used in Tray 1 or the Multi-Sheet Bypass
I
Feeder (transparencies are not supported in Trays 2-5).
Use only Premium or Standard Xerox Phaser 35 Series
I
Transparencies. See page 1 for supplies ordering information. For
information on Xerox Phaser transparencies, visit the Xerox web
site:
www.xerox.com/officeprinting/trans/
Note
It is recommended that you print transparencies to the side
output tray, however, if you do print transparencies to the
top output tray, long edge feed (LEF) is recommended.
Caution
Use only Xerox Phaser 35 Series Transparencies; other
transparencies may cause damage to the fuser. Any damage
that is caused due to the use of unsupported transparencies is
not covered by your printer's warranty.
22
Phaser 2135 Color Printer