Xerox Phaser 2135 User Manual page 66

Print Defects and Potential Remedies (cont'd.)
Print Quality Problem
Light Vertical Lines
Light areas (without
color or the wrong
color) that streak the
page.
0748-52
Repeating Defects
Marks recur uniformly
at any of these evenly
spaced intervals:
Every 143 mm or
I
5.625 inches of any
color
Every 94 mm or 3.75
I
inches of same color
Every 50 mm or 2.0
I
inches of same color
Every 58 mm or 2.25
I
inches of same color
50
Common Causes
An LED bar is dirty.
I
If the problem occurs
I
in only one color, an
imaging drum may
be scratched, dirty or
damaged.
The fuser may be
I
damaged.
One of the rollers in
I
an imaging drum are
scratched or
damaged.
One of the rollers in
I
an imaging drum are
scratched or
damaged.
The transfer belt may
I
be damaged.
Potential Remedies
Clean each of the LED
I
(a)
bars using the
cleaning pad supplied
with the toner
cartridge, or an alcohol
wipe from the
Cleaning Kit.
a
Replace the
I
corresponding
imaging drum.
Remove and inspect
I
the fuser; if damaged,
replace with a new
fuser.
Replace the
I
corresponding
imaging drum.
Replace the
I
corresponding
imaging drum.
Replace the transfer
I
belt.
Phaser 2135 Color Printer
0748-51