Automatic 2-Sided Printing From The Paper Tray - Xerox Phaser 2135 User Manual

Automatic 2-Sided Printing From the
Paper Tray
Automatic 2-sided printing is available from all trays; it is not
available from the Multi-Sheet Bypass Feeder. To use automatic
2-sided printing, the duplex option must be installed in the printer.
For best results with 2-sided printing, use 90 g/m
paper.
Automatic 2-sided printing is available for all paper sizes except A6.
Use only plain paper or heavy paper. Paper weight must be between
2
75-120 g/m (20-32 lb. bond).
Note
See Manual 2-Sided Printing (page 39) for information about
duplexing heavier paper weights.
For best results with automatic 2-sided printing, do not use heavy
toner coverage on the even-numbered pages of your print job.
Caution
Use only laser bond paper for automatic 2-sided printing in
the Universal Tray. Do not use any specialty media (such as
glossy coated paper) to print automatic 2-sided printing.
Damage caused by using unsupported media for 2-sided
printing is not covered by the printer's warranty.
Load 75-120 g/m
I
Tray.
The front side is face-up in the tray.
I
36
2
(20-32 lb. bond) paper in the Universal
2
(24 lb. bond) laser
Phaser 2135 Color Printer