Offsetting Output - Xerox DocuPrint N2125 User Manual

Offsetting Output

The Offset Catch Tray (referred to as the Offset Bin in the
printer driver), shown in Figure 3.2, is an optional output
device available for your printer.
Figure 3.2 Offset Catch Tray (front view)
The Offset Catch Tray can be used in either of two ways,
depending on how it is configured in the Control Panel's
menu system:
• As an additional 500-sheet capacity output bin to
supplement the 500-sheet standard output bin.
• To offset alternating print jobs and alternating copies
of the same print job.
To use the Offset Catch Tray, submit your print jobs as
usual, selecting Offset Bin as the destination (Auto Select
uses the Control Panel setting). The System Menu's
Output Offset item controls the default setting for
whether or not the offset bin will offset successive print
jobs or copies. Refer to the System Administrator Guide on
the printer CD for detailed instructions on configuring
the Offset Catch Tray for use.

Offsetting Output

Chapter 3: Printing 3-61