Xerox DocuPrint N2125 User Manual page 93

Table 3.6 Control Panel Menu Options (continued)
Menu
System Menu Output Timeout
(continued)
Output Offset
Output Dest
Print PS Errors
Power Saver
Defaults
Allows you to set options for the parallel port connection.
Parallel Menu
Menu Items
Port Enable
Port Timeout
Parallel PDL
Binary PS
Bidirectional
Description
Determines how many seconds the system will wait after a
bin is filled before directing output to an alternate bin
(available only if optional Offset Catch Tray is installed).
Enables or disables alternately offsetting output from jobs
(available only if optional Offset Catch Tray is installed).
Sets the default paper output destination for PCL and
PostScript jobs (available only if optional Offset Catch Tray is
installed).
Controls the use of the PostScript built in error handler or
debugger.
Defines a period of inactivity after which time the printer will
enter a low power state.
Sets the type of factory defaults to use when a "Factory
Default" is performed.
Description
Enables or disables the parallel port.
Sets the time for determining when to end an incomplete
print job and poll the next port in the polling sequence.
Sets the default emulation (page description language) for
the parallel port.
Enables or disables the binary mode of PostScript for print
jobs received on this port.
Enables or disables bidirectional communications through
the parallel port.
Using the Control Panel
Table 3.6 Page 6 of 14
Chapter 3: Printing 3-49