Xerox DocuPrint N2125 User Manual page 148

Solving Print Quality Problems
Table 5.3 Print Quality Problems (continued)
Problem
Unfused or partially
fused image
The printed image is not
fully fused to the paper
and easily rubs off.
Wrinkled prints
Prints are wrinkled,
creased, or torn.
5-34 User Guide
Possible Cause(s)
Damp paper stock.
Heavy or unusual paper stock.
Defective Fuser.
Improper paper/media type set
on control panel.
Incorrectly configured fuser
temperature
Poor paper condition.
Paper is damp.
Fuser is at its end of life
Corrective Action(s)
Replace paper stock.
Use only approved paper/media. (See
Table 2.1 on page 2-4).
Replace the Fuser. See the System
Administrator Guide on the printer CD for
ordering and installation instructions.
Set proper paper/media type.
Increase the fuser temperature setting.
Inspect/replace the paper stock.
Replace paper stock.
Replace the Fuser. See the System
Administrator Guide on the printer CD for
ordering and installation instructions.
Table 5.3 Page 6 of 8