Solving Print Quality Problems - Xerox DocuPrint N2125 User Manual

Solving Print Quality Problems

Table 5.3 Print Quality Problems
Problem
Light/faint prints
Overall image is lighter
than normal.
If you have any problems with your printer's printed
output, refer to Table 5.3 for suggested remedies.
The cases listed in Table 5.3 are probable cases only, and may
not represent all of the possible cases which may occur under
actual operating conditions. If you experience a problem which
does not seem to fall under any of the cases listed in this table,
or if you are concerned about any other aspect of printer
operation, contact your service provider.
Possible Cause(s)
Toner Saver mode.
Toner level low/empty.
Damp paper stock.

Solving Print Quality Problems

Corrective Action(s)
Turn off Toner Saver.
Remove the laser print cartridge carefully
and vigorously shake it several times, then
reinstall it. (This may help redistribute the
remaining toner before having to replace
the cartridge.)
Replace paper stock.
Table 5.3 Page 1 of 8
Chapter 5: Troubleshooting 5-29