Specifications - Buffalo LinkStation 200 Series User Manual

Chapter 11 Appendix
Email Notification
Function Button Settings
RAID Mode

Specifications

Check the Buffalo website
LAN Interface
USB Interface
Internal Drive
Disabled
Restore factory default settings
RAID 1 (LS220D and LS220DR)
for the latest product information and specifications.
Standards Compliance
Data Transfer Rates
Number of Ports
Connector Type
Supported Protocols
Network File Services
Ethernet Frame Sizes
Standards Compliance
Data Transfer Rates
Number of Ports
Connector Type
Number of Drive Bays
Drive Interface
Supported RAID
Replacement Drive
IEEE 802.3ab (1000BASE-T), IEEE 802.3u (100BASE-TX),
IEEE 802.3 (10BASE-T)
10/100/1000 Mbps (auto sensing)
1
RJ-45 8-pin (auto MDI-X)
TCP/IP
SMB/CIFS, AFP, FTP/FTPS
1500, 4084, 7404, and 9216 bytes
USB 2.0
Max. 480 Mbps
1
Type A
LS210D: 1
LS220D, LS220DE, LS220DR: 2
SATA 3 Gbps
LS220D, LS220DE, LS220DR: 0, 1, JBOD (individual drives)
LS220D, LS220DE: Buffalo OP-HDBST series drive
LS220DR: Buffalo OP-HDBN series drive
Note: The replacement drive should be the same size or
larger as the original drive. The drives listed above are
available from the Buffalo
131
website.