Buffalo LinkStation 200 Series User Manual page 101

Chapter 8 Advanced Features
4
Disable "DHCP" and enter the desired IP address and subnet mask.
5
Under "Network Settings", enter the default gateway and DNS server addresses. If no changes are necessaries,
keep them as is.
6
Click [OK].
Note: The following IP addresses are reserved and should not be used. If you configure one of them by accident,
initialize settings by referring to the
Local loopback address: 127.0.0.1, 255.255.255.0
Network address: 0.0.0.0, 255.255.255.0
Broadcast address: 255.255.255.255, 255.255.255.0
The IP address range from 224.0.0.0 to 255.255.255.255
"Initializing Using the Function Button"
100
section above.