Buffalo LinkStation 200 Series User Manual page 43

Chapter 4 Storage Management
3
Choose a RAID array.
4
Select a RAID mode and the drives to be used, then click [Create RAID Array].
Note: Normally, after a RAID array is created, it is "resynced", which optimizes the array, making it more stable.
The resyncing process will take about one hour per terabyte of space in the array. File transfers will be slower
during this period, but the array will remain fully usable. The
Navigator2 during the resync. If you clear the "Resync after creating the RAID array" checkbox, the resyncing
process will be skipped. If the LinkStation is rebooted during the resyncing process, the resync will begin again
from the beginning.
5
The "Confirm Operation" screen will open. Enter the confirmation number, then click [OK].
6
Click [OK] when completed. Next, create a shared folder by referring to the
chapter 3.
I17
message will also be displayed in NAS
"Adding a Shared Folder"
42
section in