Specifications - Buffalo LinkStation 200 User Manual

Chapter 9 Appendix
IP Address
Registered Groups
Microsoft Network Group Settings
Ethernet Frame Size
SMB
AFP
FTP
WebAccess
RAID Scanning
DLNA Server
iTunes Server
Print Server
BitTorrent
Time Machine
Direct Copy
Name/Time/Language
Email Notification
Restore/Erase
Update
RAID Mode

Specifications

Check the Buffalo website
LAN Interface
USB Interface
The LinkStation will get its IP address automatically from a DHCP server
on the network. If no DHCP server is available, then an IP address will be
assigned as follows:
IP Address: 169.254.xxx.xxx ("xxx" is a number randomly assigned when
booting the LinkStation.)
Subnet Mask: 255.255.0.0
"hdusers", "admin", and "guest"
You cannot edit or delete these default groups.
WORKGROUP
1,500 bytes
Enabled
SMB Protocol
Exclude Mac OS temp files from
recycle bin
Disabled
Disabled
Disabled
Disabled
Disabled
Enabled
Disabled
Disabled
Disabled
Disabled
Date/Time Source (NTP)
Disabled
Administrator Username and
Password
Update Notification
LS220D and LS220DR: RAID 1
for the latest product information and specifications.
Standards Compliance
Data Transfer Rates
Number of Ports
Connector Type
Supported Protocols
Network File Services
Ethernet Frame Sizes
Standards Compliance
Data Transfer Rates
Number of Ports
Connector Type
Switch between SMB2 and SMB1
automatically
Yes
Enabled
Restore factory default settings
Enabled
IEEE 802.3ab (1000BASE-T), IEEE 802.3u (100BASE-TX),
IEEE 802.3 (10BASE-T)
10/100/1000 Mbps (auto sensing)
1
RJ-45 8-pin (auto MDI-X)
TCP/IP
SMB/CIFS, AFP, FTP/FTPS
1,500, 4,084, 7,404, and 9,216 bytes
USB 2.0
Max. 480 Mbps
1
Type A
140