Buffalo LinkStation 200 Series User Manual page 127

Chapter 9 Configuring from Mobile Devices
6
Replace the four screws.
7
Insert the new drive back into the empty slot.
8
Close the front panel.
9
Connect all cables, then turn on the LinkStation.
10
Open the SmartPhone Navigator app on your mobile device and log in to Settings.
11
From Settings, tap the blinking yellow information icon.
12
Tap [Recover RAID Array], then tap [Recover RAID Array] again.
13
Tap [Yes].
14
The "Confirm Operation" screen will open. Enter the confirmation number and tap [OK].
15
The array will begin to rebuild.
126