Air Induction; Exhaust; Fuel System; Electrical System - Magni Gyro M-24 Maintenance Schedule

Inspect propeller condition (3 blades). Remove blemishes and repair
any minor damage. If needed remove the propeller and re-set in hub
59
and re-balance whole assembly. Re-attach hub assembly and wirelock.
Refer to Maintenance Manual, Section 3.18, for allowable damage.
6.4.10

Air Induction:

Task
No.
60 Inspect and clean/replace air filter as required.
6.4.11

Exhaust:

61 Check exhaust units for security/cracks.
6.4.12

Fuel System:

Filters for cleanliness and tank vents unobstructed. Drain samples
62 from all drain points and check for presence of water, foreign matter
and correct colour.
6.4.13

Electrical System:

Check battery is properly seated and secured. Ensure clean
63
connections. Check for leakage.
Check condition of wiring – look for signs of abrasion, kinking, heat
64
damage.
Task Description
045-00-24_A M24 MAINTENANCE SCHEDULE
100FH/
INSP
12 Months
Task Task
Nature Interval
100 FH/
INSP
12 Months
100 FH/
INSP
12 Months
100 FH/
INSP
12 Months
INSP and 100 FH/
SERVICE 12 Months
100 FH/
INSP
12 Months
Issue A
Certifying
Date
Person
Page 32