Liquid, Air And Gas Systems; Equipment And Environmental - Magni Gyro M-24 Maintenance Schedule

6.4.4

Liquid, Air and Gas Systems:

Task
No.
Hydraulic and other fluid systems. Check for signs of damage to pipes
35
and evidence of any leakage. Replace if necessary.
Check brake fluid reservoir (under rear seat) for leaks. Replenish fluid
36 and bleed system where necessary. Check condition of brake fluid
pipes. Ensure that brakes hold against, as near as possible, 3000 rpm.
Check fuel tanks for leaks. Ensure low fuel warning system function.
37
Drain system and replace filters. Ensure proper function of drain tap.
38 Pitot/static system vents, pitot head, drains clear.
Check 'Bendix' gear for excessive wear. Clean and lubricate with
grease. Ensure prerotator outer hose is in good condition and that
39
hose is allowed to slide through its supporting bracket during varying
control movements. Check 'Bendix' gear engages/disengages freely.
6.4.5

Equipment and Environmental:

Check condition of seats, belts/harnesses, attachment, locking and
40
release mechanisms (both).
41 Check seats (two) are fully secured.
Task Description
045-00-24_A M24 MAINTENANCE SCHEDULE
Task Task
Nature Interval
100 FH/
INSP
12 Months
100 FH/
INSP
12 Months
100 FH/
INSP
12 Months
100 FH/
INSP
12 Months
INSP/ 100 FH/
OP/C 12 Months
100 FH/
INSP
12 Months
100 FH/
INSP
12 Months
Issue A
Certifying
Date
Person
Page 28