Table of Contents
Advertisement
2.6
OVERHAUL, ADDITIONAL INSPECTIONS AND TEST PERIODS
Overhaul, additional inspections and test periods are those recommended by Magni Gyro Srl.
The local Authority may vary or mandate overhaul and test periods and additional
inspections by the issue of an Airworthiness Directive or Generic Requirement.
The overhaul, additional inspections and test periods shall be recorded accordingly with local
requirements.
2.7
INSTRUCTIONS FOR CONTINUING AIRWORTHINESS
Instructions for continuing airworthiness consist of in-service data published by Magni Gyro
Srl and must be considered by the owner/operator in addition to this maintenance schedule
in order to ensure the approved maintenance schedule remains valid for the M24 (M24C).
Instructions for continuing airworthiness (Service Bulletins, Service Letters, etc.) should be
formally technically assessed by the owner/operator and adopted if required to ensure
operational safety and reliability.
Instructions for continuing airworthiness applicable to the gyroplane shall be included in the
gyroplane documentation accordingly with local requirement and form part of this
maintenance schedule.
Compliance with adopted continuing airworthiness information shall be recorded accordingly
with local requirements.
2.8
CHANGES (REPAIRS OR MODIFICATIONS)
Approved 'changes' which have been carried out to the gyroplane, engine, components and
radio after original manufacture, must be recorded in the appropriate log book(s).
Any recurring inspection or maintenance task resulting from approved 'changes' shall be
recorded accordingly with local requirements.
2.9
DUPLICATE INSPECTIONS
When required to perform a critical task inspection or following initial assembly or disturbance of
a control system or vital point, tit is mandatory to duplicate inspections.
Certifications must be recorded in the appropriate worksheet, log book or aircraft technical log.
2.10
SCHEDULED MAINTENANCE WORKSHEETS
Worksheets shown in Section 6 must be issued and the tasks certified for all scheduled
maintenance checks. These worksheets become part of the maintenance records required to be
kept by the owner/operator.
045-00-24_A M24 MAINTENANCE SCHEDULE
Issue A
Page 6
Hide quick links:
Advertisement
Table of Contents
