A. General
This manual applies to Cleaver-Brooks FLX Model boilers
(hot water) in sizes ranging from 12,500,000 to 25,000,000
Btu/hr input.
Fuel Series
700- Gas
100-No.2 0il
200 - Combination Gas & No.2 Oil
Design Pressure
30, 60, 125, or 160 psig hot water
750-364
CHAPTER 1
GENERAL DESCRIPTION
A. General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1
B. The Boiler . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2
C. Construction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2
D. Hot Water Controls (All Fuels). . . . . . . . . . . . . . . . 1-2
CAUTION
! DANGER
The care taken in placing the boiler into initial
service is vital to continuous, reliable operation.
If the boiler is to be used for temporary heat (for
example in new construction), properly treated
water must be used. Failure to do so can be
detrimental to the boiler.
1-1