Advanced Settings - HIKVISION DS-KD8003-IME2 Configuration Manual

2. Enable Enable Main FTP.
3. Select IP address from the drop-down list of server mode.
4. Enter the FTP server address, and port No.
5. Optional: Enable the anonymity.
6. Enter the name and password.
7. Select the directory structure and set the separator, naming item, and naming
element.
8. Click Save to enable the settings.
Note
The default port No. is 21.
•
To enable anonymity or not is according to whether the FTP server enables
•
anonymity.

1.7.4 Advanced Settings

Steps
1. Click Advanced Settings to enter the advanced network settings page.
Module Door Station Configuration Guide
Figure 1-26 FTP Settings
20