Intercom Protocol; Sub Module - HIKVISION DS-KD8003-IME2 Configuration Manual

Module Door Station Configuration Guide
2. Enable Enable Motion Detection.
3. Configure the parameters.
4. Click Save.
Note
The arming schedule is defaulted as all-day.

1.6.9 Intercom Protocol

Steps
1. Click Intercom Protocol to enter the intercom protocol page.
2. Select the protocol according to needs.
3. Click Save.

1.6.10 Sub Module

Steps
1. Click Sub Module to enter the sub module configuration page.
Figure 1-22 Sub Module
2. Optional: Enter the Room No. for each call button of the nametag module.
16