Table of Contents
Advertisement
Image 2-13: EC-210 rear I/O plate with connections
Lower chassis
1.
Remove the four screws that secure the keyboard assembly to the lower chassis.
Image 2-14: Lower chassis
1
Lower-chassis screws
2
EC-200 future expansion button group
2.
Tilt up the keyboard assembly and insert the left and right edges of the keyboard assembly in the chassis slots
to hold the keyboard assembly upright.
Image 2-15: Chassis slot (left) for keyboard assembly
1
Left-side chassis slot for keyboard assembly
(The right side of the chassis also has a slot.)
3.
Disconnect the EC-200 trackball cable.
4.
Connect the EC-210 trackball cable.
Image 2-16: Keyboard assembly in chassis slots
1
Lower chassis
2
Keyboard assembly
3
Chassis slot on left side
4
Chassis slot on right side
24-1701050-00 /01
EC-200 to EC-210 Conversion Kit
Conversion process
21
Advertisement
Table of Contents
