Table of Contents
Advertisement
When the scan is complete, the
Acquiring Signal message will display.
Acquiring the signal may take up to 5
minutes to complete.
6. After your receiver has acquired the signal,
it is ready to be activated. To activate
service call 1-800-963-DISH (3474).
1-800-963-DISH (3474)
After your receiver is activated,
the electronic program guide will download.
This may take up to 10 minutes to complete
(potentially longer if an external hard drive
is connected).
This completes the setup for new receivers. You may now use
STANDARD OPERATION starting on the next page for subsequent use.
Page 11
Advertisement
Table of Contents
