Installation - Siemens SINAMICS S120 Manual

4.1.5

Installation

4.1.5.1 Installation
Plug the motor connector into socket X1 for Single Motor Modules and into sockets X1 and
X2 for Double Motor Modules.
The motor connector has a catch, which snaps into the opening provided on the Motor
Module.
Note
The catch mechanism does not provide strain relief for the cables connected to the Motor
Module.
Figure 4-3
Power Units in Booksize C/D-Type Format
Manual, 12/2018, 6SL3097-5AC20-0BP0
Latching the motor connector into position
Motor connection, shield support and fabrication
4.1 Motor plug connector for Motor Modules 3 A ... 30 A
81