Connecting Milk; Settings By The Service Technician - Jura 748 Instructions For Use Manual

1 Preparing and using for the first time

Connecting milk

Settings by the service
technician
14
T Place a receptacle under the dual spout.
'Machine is heating'
'Machine is rinsing',
stops automatically. The start screen is displayed. Your GIGA
is ready for use.
E If the filter is active, this is indicated by a blue filter symbol at
the top of the display.
Your GIGA creates fine, creamy, feather-light milk foam with a per-
fect consistency. The most important requirement for frothing milk
is a milk temperature of 4 – 8 °C. We would therefore recommend
using a JURA milk cooler.
T Connect the milk pipe to the dual spout. To do this, attach
the end of the milk pipe to the connector on the right-hand
side of the dual spout.
T Connect the other end of the milk pipe to a milk cooler.
Your authorised JURA service technician can change various set-
tings, e.g.:
U
Codes: Four codes can be assigned. For each code, you can
define which programme items are available or disabled. Each
code corresponds to different authorisations. For instance,
you can define that initiation of the maintenance programmes
is disabled using a code.
U
Activating/deactivating the 'Silent Pump' function (for prepar-
ing hot water)
U
Choose not to display the red speedometer symbol for speed
speciality coffees on the start screen.
You can also obtain the following optional accessories for your GIGA
from your JURA service partner:
U
Coffee grounds disposal / drip drain set
U
Lockable bean container
'Milk system is being rinsed'. The rinse