Problem
The product does not oper-
ate in a moist environment.
Storage
•
Clean the product before storage.
•
Keep the product in a dry and frost-free area.
•
Keep the product in a locked area to prevent access
for children or persons that are not approved.
Disposal of the product
•
Obey the local recycling requirements and applicable
regulations.
•
When the product no longer is used, send it to the
dealer or discard it at a recycling location.
10
Cause
Moist has mixed with the oil
in the product.
The lamella absorbs water
and causes a blockage in
the rotor.
Storage and disposal
Solution
Disassemble and clean all the parts with fuel. Then lubri-
cate all parts and assemble the vibrator head.
Drain the water tank of the air compressor.
Disassemble and clean all the parts with fuel. Then lubri-
cate all parts and replace the lamella. Assemble the
parts. Put the product in storage with the vibrator head
up and the ball valve open. Put a container below the
product to collect the fuel that comes out.
1162 - 001 - 26.03.2020