Table of Contents
Advertisement
NOTE: For more accurate torque, whenever possible, turn/tighten
the mounting locknuts rather than turning the mounting bolts.
a -
Flat washer (4)
b -
1/2 in. diameter bolt (4)
c -
Shank of bolt
d -
Flat washer (4)
e -
Locknut (4)
Description
Outboard mounting locknuts and
bolts
Electrical, Fuel Hose, Flush Hose, and Control
Cables
FRONT COWL GROMMET
NOTE: Sufficient slack must exist in wiring, battery cables, and
hoses that are routed between the grommet and engine
attachment points to relieve stress and prevent hoses from being
kinked or pinched.
OUTBOARD INSTALLATION
e
d
c
Nm
75
102
a
b
3729
lb. in.
lb. ft.
55
Advertisement
Table of Contents
