Table of Contents
Advertisement
OUTBOARD INSTALLATION
NOTE: The inside holes on the transom reinforcement plate are
for the lower transom bolts and the outside holes are for the upper
transom bolts.
a -
Large transom washer
b -
Transom reinforcement plate
Description
Large transom washer
Transom reinforcement plate
1. Apply marine sealer to shanks of bolts, not the threads.
2. Fasten the outboard with the correct mounting hardware.
Tighten locknuts to the specified torque.
a
101
b
33962
Part Number
67‑896392
67‑896305
Advertisement
Table of Contents
