Table of Contents
Advertisement
OUTBOARD INSTALLATION
6. Attach two cable ties around the grommet tube. Reattach the
cowl seal.
a -
Cable tie
FLUSH HOSE ROUTING
If desired, the flush hose can be routed outside the cowling as
follows:
1. Using a needle nose pliers, break out the semi‑circular
knockouts in the access cover and lower cover. Smooth the
edges of the knockout with sandpaper or a small knife.
2. Route the flush hose through this opening.
a
b
a -
Knockout
a
b -
Flush hose
105
23639
23642
Advertisement
Table of Contents
