Oil Injection Set-Up - Mercury Jet OptiMax 80 Manual

Oil Injection Set‑Up
FILLING OIL INJECTION SYSTEM
1. Fill the oil tank with the specified oil. Refer to Filling Oil
Injection System. Add only enough oil to bring the oil level
up to the bottom of the fill neck.
All Models
Oil tank
PRIMING THE OIL INJECTION PUMP
Before starting engine for the first time, prime the oil injection
pump. Priming will remove any air that may be in the pump, oil
supply hose, or internal passages.
a
a - Oil injection pump
IMPORTANT: Fill the engine fuel system with fuel before priming
the oil injection pump. Otherwise, the fuel pump will run without
fuel during the priming process and may be damaged.
OUTBOARD INSTALLATION
Capacity
4.72 liters (5 qt.)
29465
Fluid Type
Optimax/DFI 2‑Cycle Engine Oil
b - Oil supply hose
114
b
7912