Mounting The Unit To The Wall - Better Homes and Gardens 9223GYWM Manual

Step 19 - Mounting the unit to the wall.
RECOMMEND
• Mark the location on wall through the mounting holes on the hanging rail (I).
• Drill holes in the marked spots on the wall. If screws will not be going directly into studs, insert wall anchors (21).
• Complete mounting by tightening mounting screws (22) through mounting spacers (23) into studs or
wall anchors (21).
• Insert adjustable shelf (B), using the shelf clips (11).
11
x 4
21
x 2
22 x 2
23 x 2
Pg 20 of 44
WARNING:
BEFORE CUTTING OR DRILLING INTO ANY WALL SURFACE, VERIFY THE LOCATION OF ELECTRICAL,
PLUMBING AND GAS LINES. CUTTING ANY OF THESE MAY CAUSE SERIOUS INJURY.
• It is imperative that the unit be fastened to the wall for safety and stability.
• For safety reasons, it is imperative to use a stepladder.
B
11
23
22
11
(800) 892-3986 IS92230-I3