Dab Operation; Memory; Dab Scan - Logik LPDAB10 Instruction Manual

DAB Operation

To listen to the tuned stations press the
press the buttons, you will skip to the previous or next stored
station. The unit will display the station name.

Memory

When you power up the unit again, the unit plays the same mode and
station (DAB or FM) as the last operation.

DAB Scan

The DAB Scan option enables you to scan the DAB band for new
stations.
Before starting a scan, ensure that the earphones are
connected to the unit and in the listening position as the
earphone cable is used as the aerial.
Menu button to display the Setting menu.
1. Press the
2. Press the
select "DAB Scan".
3. The unit will scan each channel for stations. If stations are found
within a channel then the total number of stations found will be
displayed before the next channel is scanned. If no stations are
found the "Station Not Available" will display on the screen.
buttons repeatedly and then press the
buttons. Each time you
button to
11