Basic Operation; Powering On/Off; Selecting Modes; Adjusting Volume - Logik L22DAB10 Instruction Manual

Basic Operation

Powering ON/OFF

After connecting the mains adapter to the unit and the mains socket switch the ON/OFF
switch at the back of the unit to the "ON" position to switch the unit on.
• Switch the ON/OFF switch to the "OFF" position to turn the unit off.
• Disconnect the power cable of the mains adapter from the mains socket if you want to
switch the unit off completely.

Selecting Modes

Press the DAB/FM button repeatedly to switch between modes (DAB or FM).

Adjusting Volume

Press the Vol+ or Vol– button to increase/decrease the volume.

DAB Operation

To listen to the tuned stations press either the PREV / NEXT buttons. Each time you press the
PREV / NEXT buttons, you will skip to the previous or next stored station. The unit will display
the station name.

Memory

When you power up the unit again, the unit plays the same mode and station (DAB or FM) as
the last operation.

Storing Stations

You can store up to 10 of your favourite stations to the memory. This will enable you to access
your favourite stations quickly and easily.
1. To store a preset, you must first be listening to the station that you would like to save,
press and hold the PRESETS button.
Press the PREV or NEXT button to select your desired preset station number.
2.
Press the SELECT button to confirm the selection.
3.
The station will be stored and the display will show "Preset # stored".
4.
8