Table of Contents
Advertisement
1
General safety information
Please read the following notes carefully and observe them.
1.1 General information
Important requirements to ensure that this GEMÜ 3030 mFlow
works perfectly:
● Correct transport and storage.
● Installation and commissioning by trained personnel.
● Operation according to these operating instructions.
● Recommended maintenance.
The GEMÜ 3030 mFlow must be used in accordance
with these directions. All information in these operating
instructions regarding operation, servicing and
maintenance must be observed and applied. If the
information is not observed, the operator's guarantee
rights and the manufacturer's legal liability cease.
The manufacturer shall assume no responsibility for the
GEMÜ 3030 mFlow if these safety notes are not observed.
Therefore, you must observe:
● the contents of these operating instructions.
● the relevant safety regulations for the installation and
operation of electrical systems.
● that this device must not be used in potentially explosive
areas.
The regulations, standards and guidelines named in these
operating instructions are only applicable in Germany. If
the GEMÜ 3030 mFlow is used in other countries, the local
applicable regulations must be observed. When dealing with
harmonised European norms, standards and guidelines, these
apply within the Single European Market. The operator must
also adhere to national rules and guidelines, if applicable.
The descriptions and instructions in these operating
instructions refer to the standard version.
All rights including copyright and industrial property
rights are expressly reserved.
The safety information does not take the following into account:
Unexpected incidents and events, which may occur during
installation, operation and servicing.
Local safety regulations which must be adhered to by the
operator and by any additional installation personnel.
In cases of uncertainty:
Consult the nearest GEMÜ sales offi ce.
1.2 Explanation of symbols and signs
Important information is identifi ed in these operating
instructions by the following symbols:
This symbol indicates danger. There is danger to
life or health of persons and/or considerable
material damage can occur, if the instructions
DANGER
given here are not followed.
Slight bodily injury and damage to property
may occur if the safety information given in
connection with this symbol is not observed.
This symbol indicates notices which give
important information regarding your GEMÜ 3030
mFlow.
1.3 Safety notes
● Only qualifi ed and trained personnel should
assemble, electrically connect and commission
the GEMÜ 3030 mFlow. Use qualifi ed
DANGER
personnel for operation, servicing, inspection
and assembly. The areas of responsibility, the
monitoring of personnel and their competence
areas should be defi ned precisely by the
operator. Train personnel with insuffi cient
knowledge or, if necessary, have them trained.
By the manufacturer / supplier on order of the
operator. Ensure that all members of personnel
understand the safety instructions.
● Ensure that the power supply equipment is
electrically safe.
● Ensure that the electrical values are correct.
If the safety information is disregarded, persons, the
environment and the GEMÜ 3030 mFlow may be endangered.
Furthermore, failure to observe the safety information may lead
to a complete loss of claims rights.
Adhere to legal regulations.
3 / 40
3030 mFlow
Advertisement
Table of Contents
