Hach NA5600 sc Na+ Operation Manual page 5

Figure 2 Keypad description
1 Display
2 RIGHT and LEFT arrows: change the measurement
screen and select options. Refer to
measurement screens
3 UP and DOWN arrows: change the channel shown
on the measurement screen, select options and
enter values.
4 Home: shows the measurement screen
5 Enter
3.2 Display description
Figure 3 shows the top half of the measurement screen. The top half of the measurement screen
shows the status of the analyzer and the sodium concentration for one channel. To change the
channel shown, push the UP or DOWN arrow. To show more than one channel, push the RIGHT
arrow.
The background color of the display changes to show the status of the analyzer. Refer to
show the active errors, warnings and reminders, push diag and select DIAGNOSTICS.
Figure 4 shows the bottom half of the measurement screen. The bottom half of the measurement
screen shows the measurement quality, service status and solution levels.
Additional
on page 7.
6 Diag: shows the Diag/Test Menu
7 Cal: shows the Calibrate Menu
8 Back: goes back to the previous screen
9 Menu: shows the main menu
Table 1. To
English 5