SSS Siedle DoorCom IP DCIP 650-0 Manual page 25

Step 3
Create virtual users
In the first table DCIP-SC (virtual
users) create the users. Each
user should be given a unique
name wherever possible such as
Secretarial.
Step 4
In the tree structure of the
BPS 650-... , select the relevant
door station and assign the users
to the previously created call
buttons. Subsequently transfer the
configuration to SII 650-.../
SIVS 610-... .
Step 5:
In the tree structure of the
BPS 650-..., select the SII 650-... .
Pressing the Configuration button
in the DCIP-SC... will open a new
window. In this window, it is
possible to select which users are
read out to the configuration being
created. In this selection process,
different configurations can be
generated for different software
clients.
Step 6:
The set configuration (*.dcip) can
be imported into Software Client.
A USB stick is advisable for
transmission of the files.
25