Wave-Flamer Setting; M-Set: Modus; M-Set: Box; M-Set: Sec-Key - Explo X2 Wave Flamer Manual

3.2 WAVE-Flamer Setting

16

3.2.1 M-Set: MODUS

Allows you to switch Modes between Test, Armed, or Sleep.

3.2.2 M-Set: BOX

Allows you to change the Boxnumber of the device.

3.2.3 M-Set: SEC-KEY

Allows you to change the Secure-Key of the device (Standard 139). The Secure-Key can be used to
encode the radio transmittance inside a given System-adress. Transmitters can only control devices
set to the same Secure-Key.

3.2.4 M-Set: FREQUENCY

Allows you to change the Frequency (Standard 6).

3.2.5 M-Set: POWER

Allows you to change the strength of the radio module (Standard 10).
Edit WAVE-Flamer settings
M-Set: MODUS
M-Set: BOX
M-Set: SEC-KEY
M-Set: FREQUENCY
M-Set: POWER
M-Set: TIMEOUT
M-Set: LOCK
M-Set: SYS
M-Set: Pos 1-15 (Igntime)
M-Set: Pos 16-30 (Igntime)
M-Set: Pos 1-15 (20ms pulse)
M-Set: Pos 16-30 (20ms pulse)
M-Set: CENTER
M-Set: Invert
M-Set: Pos MIN
M-Set: Pos MAX
M-Set: System Restore Default