3.1.2 Pressure
Shows the current pressure (100% = 10bar) of the device(line 1). In the second line, you can see the
time (in sec) it took the device to reach the maximum pressure of 10bar, as well as the lowest value
the pressure sank to after reaching 100% (u97% means, the device sank to 97% of the maximum
pressure).
3.1.3 Battery Info
Shows the voltage value of the 12V-supply (line 1), as well as the 24V-supply (line 2).
3.1.4 Type and Showname
12
Displays the Type of product, as it is named in the device-List of the transmitter (line 1), as well as the
name of the show that is currently saved onto the transmitter (line 2).
3.1.5 Check and Lines
Shows the checksum of the device (line 1) and the number of ignition lines of the Show, that
correspond to the device (line 2).
3.1.6 Sec-Key and Frequency
Show the used Secure-Key (line 1) and the chosen frequency of the integrated radio module (line 2).
Need help?
Do you have a question about the X2 Wave Flamer and is the answer not in the manual?