Edit Wave-Flamer Settings; Edit Dmx Settings; Drivetest - Explo X2 Wave Flamer Manual

Hide thumbs Also See for X2 Wave Flamer:
Table of Contents

Advertisement

3.1.11 Edit WAVE-Flamer settings

Allows you to change settings of the device. See Chapter 3.2.

3.1.12 Edit DMX settings

Allows you to change the DMX settings. See Chapter 3.3.

3.1.13 Drivetest

Allows you to start the "Drivetest". This Test checks if all angles can be reached by the moving head
in a given timeframe. If it doesn't reach a position within the limit, it will lead to a timeout, and an
error. This test is relevant if you use external batteries, whose voltage is already below the optimum
14
value (see 3.1.3), and you still wish to check if all positions can be reached fast enough.
By pushing Mode/OK you enter a sub menu, in which the "Drivetest" can be started.
If the Plus-Button is pushed in this menu, the Drivetest will be started. During the Test, all Positions
(except for Position 8, or 0°) are driven to. After the last Position has been reached (Position 15) the
number of errors from 0 to 14 are displayed (see graphic below).
Errors at the Drivetest can be a sign for weak batteries. During sequences, you may be facing longer
times because of this.
WARNING
While the Drivetest is being made, no objects may be placed in the movement zone
of the Swivel Head, and the Head itself may not be touched.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the X2 Wave Flamer and is the answer not in the manual?

Subscribe to Our Youtube Channel

Table of Contents