Sunny Health & Fitness Synergy Pro User Manual page 8

We value your experience using Sunny Health and Fitness products. For assistance with parts or
troubleshooting, please contact us at support@sunnyhealthfitness.com or 1-877-90SUNNY (877-
907-8669).
#84L 9/16 1PC
#84R 9/16 1PC
14L
15L
84L
15L
14L
94
S15
15L
94
S15
S19
84L
96
S15
#94 S13-S14-S15
1PC
#96 S17-S19 1PC
1
14R
15R
84R
14R
S15
15R
94
S19
S15
84R
STEP 5:
WARNING! Read instructions carefully as
improper assembly may cause permanent
damage to your bike.
S19
Note: The Pedals (No. 15L & NO. 15R) are
marked "L" and "R" for Left and Right.
Remove the Left & Right Nylon Nuts (No.
84L/R) located on the Left & Right Pedals
(No. 15L/R) with Wrench (No. 96).
Turn the Tension Control Knob (No. 21)
clockwise as tightly as you can with your
hand.
Align the Left Pedal (No. 15L) with the Left
Crank (No. 14L) at 90°. Turn the pedal bolt
on the
COUNTER-CLOCKWISE as tightly as you
can with your hand. Then, use Spanner
(No. 94) to tighten and secure.
Turn the Left Nylon Nut (No. 84L)
CLOCKWISE as tightly as you can with
your hand. Use Spanner (No. 94) to hold
the pedal bolt on the Left Pedal (No. 15L)
and use Wrench (No. 96) to turn the Left
Nylon Nut (No. 84L) CLOCKWISE at the
same time, until it is tightened on to the Left
Crank (No. 14L).
Align the Right Pedal (No. 15R) with the
Right Crank (No. 14R) at 90°. Turn the
pedal bolt on Right Pedal (No. 15R)
CLOCKWISE as tightly as you can with
your hand. Then, use Spanner (No. 94) to
tighten and secure.
Turn the Right Nylon Nut (No. 84R)
96
COUNTER-CLOCKWISE as tightly as you
can with your hand. Use Spanner (No. 94)
to hold the pedal bolt on the Right Pedal
(No. 15R) in place. Then use Wrench (No.
96) to turn Right Nylon Nut (No. 84R)
94
COUNTER-CLOCKWISE at the same time,
until it is tightened on to the Right Crank
(No. 14R).
The assembly is complete!
7
Left Pedal (No. 15L)