Attaching The Lanyards To The Controllers - HTC VIVE Pro Eye User Manual

54 Controllers
3. Click Devices.
4. Click Pair Controller. Follow the instructions to complete the process.
The status light shows as blinking blue while the pairing is in progress. The status light
turns solid green when the controllers are paired with the headset.

Attaching the lanyards to the controllers

To purchase additional or replacement hardware, click the Accessories tab on
product/. Product availability may vary; please contact customer care for concerns.
Using the lanyards may help prevent the controllers from accidentally being dropped; however,
please do not fling or violently throw the controller because the lanyard may break.
1. While holding the controller, insert the lanyard's thread from the top to the bottom hole.
2. Loop the lanyard through the thread, and then tug the lanyard to fasten it in place.
3. Place the lanyard on your wrist, and then adjust the lock to tighten the lanyard comfortably
around your wrist.
www.vive.com/