Table of Contents
Advertisement
40
Base stations
Installing SteamVR Base Station 2.0
To purchase additional or replacement hardware, click the Accessories tab on
product/. Product availability may vary; please contact customer care for concerns.
Before installing the base stations, decide first whether you want to set up a room-scale or
seated/standing-only play area. See
§ Make sure that the base stations are installed outside the play area and securely set up from
being accidentally struck, dropped, or bumped to avoid damage or compromised
performance.
§ Remember to peel off the protective film from the front panel after you've mounted the base
stations.
1.
Mount the base stations diagonally at opposite corners of your space and near power
outlets.
For details on how to use the mounting kit, see
You can also use tripods, light stands, or cargo poles when mounting the base stations, or
even place it on stable book cases. Just avoid using unstable mounting solutions or
surfaces that are prone to vibration.
2.
Adjust the base stations so that the front panels are facing toward the center of the play
area.
3.
Attach the power cables to the base stations, and then plug each of the adapter into a
power outlet to turn them on.
Use only the power cables and adapters that came with your base stations.
Depending on the variant of your hardware, the status lights should be white or green.
Planning your play area
on page 59.
Using the mounting kit
www.vive.com/
on page 47.
Advertisement
Table of Contents
