Attaching The Lanyards To The Controllers - HTC VIVE Pro 2 User Manual

62 Controllers
3. Click Devices.
4. Click Pair Controller. Follow the instructions to complete the process.
The status light shows as blinking blue while the pairing is in progress. The status light
turns solid green when the controllers are paired with the headset.

Attaching the lanyards to the controllers

This hardware is included with the full kit, but not with the headset-only package. You can
purchase them separately if you don't have the full kit. To order, go to the Accessories section
on www.vive.com/product/. Product availability may vary; please contact customer care with
questions.
Attaching the lanyards can help prevent accidentally dropping the controllers. Don't fling or
violently throw the controller as the lanyard may break.
1. While holding the controller, insert the lanyard's thread from the top to the bottom hole.
2. Loop the lanyard through the thread, and then tug the lanyard to fasten it in place.
3. Place the lanyard on your wrist, and then adjust the lock to tighten the lanyard comfortably
around your wrist.