Route any calls from any IP to specified port group
3.11.2
Create port group
Before we can route calls to a port group, create the port group first as shown below. On the Call &
Routing Port Group, click Add to create a new port group.
Port 0 to port 2 are assigned to port group 7.
Route any calls to the port group
On the Call & Routing IP-Tel Routing interface, click Add to create a new routing rule.
As shown above, if the routing rule is matched, calls will be routed to port group 7.
4-/8-/16-/24-/32-Port SIP Internet Telephony Gateway
58