Action Url - Planet Networking & Communication VGW 20FS Series User Manual

Explanation of related parameters:
Hint Language
NAT Traversal
NTP
Primary NTP server address
Primary NTP server port
Secondary NTP server address
Secondary NTP server port
SYN Interval
Time Zone
Daylight Saving Time
Daily Reboot
Reboot time
Web Port
Telnet port
Access Web by WAN
Access Web by LAN
Access Telnet by WAN
Access Telnet by LAN

Action URL

3.8.8
Action URL can be used as a means to allow the VoIP platform to learn about the VGW-X20FS SERIES's
status. It transmits data via GET request over the HTTP protocol. The VGW-X20FS SERIES is an HTTP
client. At HTTP server side, GET request must be processed by the VoIP platform. Thus, the purpose is
achieved.
IVR language of the gateway
User can choose 'Disable', ' STUN', 'static NAT' and 'dynamic NAT'.
To Enable or disable NTP
The IP address of primary NTP server; default IP address is us.pool.ntp.org.
The service port of primary NTP server; Default port is 123.
The IP address of secondary NTP server ; Default IP address is 18.145.0.30
The service port of secondary NTP server; Default port is 123
The interval to synchronize the time of the VGW-X20FS SERIES. Default
value is 3600s.
The time zone of the gateway; Default configuration is United States
central time, Chicago.
Enable or disable daylight saving time
Whether to enable daily reboot
The time to reboot the gateway daily
The web port of the gateway; Default port is 80
Listening port of telnet service; Default port is 23
Enable or disable 'Access web service from WAN'
Enable or disable 'Access web service from LAN'
Enable or disable 'telnet service from WAN'
Enable or disable 'telnet web service from LAN'
Figure 3.10-8 Action URL
47
4-/8-/16-/24-/32-Port SIP Internet Telephony Gateway